Application concept · Kelowna · illustrative 520 sq ft
Garage Flake Flooring Concept
- Example area
- 520 sq ft
- Days allowed
- 2
- Finish
- Domino
- Indicative cost
- $8–$12/sq ft
Application concept. This is an illustrative proposal, not a completed job. Dimensions, slab conditions and schedules are assumptions. A site assessment, product specification and physical sample are needed before work can be quoted.
Procedural finish illustration · Kelowna · Flake Epoxy + Polyaspartic · 520 sq ft
Example brief
Planning example: 520 sq ft in Kelowna. A two-car garage with salt scaling, cracks and an older coating. The aim is an easy-clean surface for everyday parking.
The challenge
Failed coatings and weak concrete must be removed before a new system can bond. A site assessment establishes repair depth and moisture requirements.
Proposed approach
- 01Inspect moisture, cracks and movement joints.
- 02Remove existing coating and unsound concrete mechanically.
- 03Repair damaged areas with compatible materials and preserve movement joints.
- 04Approve a flake sample, then apply the specified base, broadcast and topcoat.
- 05Confirm pedestrian and vehicle access times against product data and site conditions.
Design intent
A uniform flake finish could simplify cleaning. Repairs, moisture treatment and product cure time determine the actual schedule. The 2-day installation allowance is illustrative, not a committed schedule.