Skip to content

Application concept · West Kelowna · illustrative 740 sq ft

Basement Metallic Flooring Concept

Example area
740 sq ft
Days allowed
3
Finish
Molten Copper
Indicative cost
$12–$18/sq ft

Application concept. This is an illustrative proposal, not a completed job. Dimensions, slab conditions and schedules are assumptions. A site assessment, product specification and physical sample are needed before work can be quoted.

Illustrative slabFinish concept: Molten Copper

Procedural finish illustration · West Kelowna · Metallic Epoxy · 740 sq ft

Example brief

Planning example: 740 sq ft in West Kelowna. A basement being considered for a family room with a warm metallic finish and continuous surface.

The challenge

Below-grade moisture, flatness and room lighting affect the specification. This example assumes no measured moisture results.

Proposed approach

  1. 01Investigate water ingress and test moisture before specifying a coating.
  2. 02Remove contaminants and prepare the concrete.
  3. 03Specify compatible moisture mitigation only where site tests and product limits require it.
  4. 04Repair the substrate, approve a sample under the room lighting, and apply the selected metallic system.
  5. 05Confirm pedestrian and vehicle access times against product data and site conditions.

Design intent

The intent is a warm decorative floor. Additional moisture work changes the cost and schedule, and the final appearance depends on the approved sample and application. The 3-day installation allowance is illustrative, not a committed schedule.

Call MattGet a project quote